CushDrive Sprockets | CushDrive Sprocket System
15788
product-template-default,single,single-product,postid-15788,woocommerce,woocommerce-page,ajax_fade,page_not_loaded,,qode_grid_1300,footer_responsive_adv,qode-content-sidebar-responsive,columns-3,qode-product-single-tabs-on-bottom,qode-theme-ver-10.1.1,wpb-js-composer js-comp-ver-5.0.1,vc_responsive
 

Buy Your CushDrive Sprocket System

Sale
whitebackground

CushDrive Sprocket System

$299.99 $285.99

Meet the CushDrive Sprocket System, the bolt-on cush hub your enduro, supermoto, and dual sport we have all been waiting for.

 

Engineered with 24 race-spec serviceable urethane bushings the CushDrive system isolates your precious drivetrain from engine-killing vibration and pulsation. It is completely serviceable with replaceable bushings and interchangeable sprockets ranging from 44T to 51T.

 

Follow this link to purchase additional sprockets to change your ratio.  

 

Please verify fitment below before ordering.

 

FREE TWO DAY SHIPPING

 

Clear

 

Engineered with 24 race-spec serviceable urethane bushings the CushDrive system isolates your precious drivetrain from engine-killing vibration and pulsation. It is completely serviceable with replaceable bushings and interchangeable sprockets ranging from 44T to 51T. CushDrive Sprockets decrease driveline shock loads, decrease countershaft spline wear, increase the life of your chain and sprocket, and decrease chain chatter at low RPMs. All while making your motorcycle easier and more comfortable to ride.

 

Please ensure to check the fitment advice below, as some manufacturers have offered several different sprocket configurations over the years. (KTM-built Husqvarna bikes are different than BMW-built Husqvarna bikes, for example). We suggest to double-check your ID and PCD via this link. [link]

 

CushDrive Sprockets have the following Inside Diameter (ID ) and Pitch Circle Diameter (PCD)

 

  • KTM – Husqvarna – Husaberg : ID 125mm / PCD 150mm
  • Beta:  ID 125mm / PCD 152mm
  • Honda: ID 125mm / PCD 152mm
  • Kawasaki: ID 126mm / PCD 146mm
  • Suzuki: ID 126mm /  PCD 146mm
  • Yamaha: ID 130mm / PCD 150mm

 

What Else Should I Know?


  • Free shipping is included to the US and Canada
  • No need to change hubs, wheels, or spokes
  • You’ll receive an assembled CushDrive Sprocket System with your choice of a 44T to 51T sprocket
  • Additional sprockets are extra
  • There are no complicated install procedures, if you can change a sprocket, you can install this
  • The CushDrive Sprocket System has no daily maintenance requirements. However, when you adjust and lube your chain we always recommend that you perform a visual inspection.
  • Bushings are warrantied for 10,000 miles or 5 years, whichever occurs first, however we recommend to inspect them at 5,000 miles for wear. If you notice excess play or wear, we’ll replace them, no questions asked. Sprockets are warrantied against faults in materials and workmanship as they are a wear item.
  • Professional off-road or hard enduro riders frequenting muddy or wet conditions are advised to adhere to a more stringent maintenance schedule consistent.


Have specific questions on CushDrive Sprocket System fitment? Click here to find more information here.

The CushDrive Sprocket System is about the same width as your chain, however it requires about 3-5mm more clearance than a typical sprocket. Overly aggressive chain guides may require slight massaging, but most factory units are without issue.

The unit is assembled with high-quality stainless bolts, with nuts protruding on the inside of the unit, we avoided using any obscure fasteners to allow for worst-case field serviceability or on-the-road sprocket changes. These bolts are on the spoke side of the driveline and won’t interfere with anything.

Older motorcycles with smaller rear swing-arms may have mounting issues, such as the Honda XR650L, but we are working on a specific model for that machine.

Inside Diameter (ID ) / Pitch Circle Diameter (PCD)

  • KTM – Husqvarna – Husaberg : ID 125mm / PCD 150mm
  • Beta:  ID 125mm / PCD 152mm
  • Kawasaki: ID 126mm / PCD 146mm
  • Suzuki: ID 126mm /  PCD 146mm
  • Yamaha: ID 130mm / PCD 150mm

Some motorcycle manufacturers have gone through several owners in recent years and may have changed sprocket sizing. If you are not sure of the Sprocket ID (Inside Diameter) or PCD (Pitch Circle Diameter) then check this link to see if your bike will fit –  Sprocket size

As always, we’re here to help, so feel free to send us an email. matt@adventure-imports.com

Weight 2.00 lbs
Dimensions 14 x 14 x 2 in
Fitment

KTM-Husqvarna-Husaberg, Beta, Suzuki-Kawasaki, Yamaha, Honda CRF

Sprocket Size

45, 46, 47, 48, 49, 50, 51, 52

Reviews

There are no reviews yet.

Be the first to review “CushDrive Sprocket System”

SKU: CUSHDRIVE Category: